United Technologies Interlogix Advisor Advanced ATS1000A-SM, Руководство для менеджеров

Страница: 49 / 100

Advisor Advanced Manager Manual 41
To perform the walk test:
1. Enter the menu.
Next, you are prompted to choose between total and reduced walk test.
Walktest scope
>Total<
The following options are available:
- Total: Standard walk test. All appropriate zones are tested.
- Reduced: Reduced walk test. This test is limited only zones that were not
active recently, during last 4 hours, or since the last set.
Choose a walk test scope and press Enter.
The display lists all zones to be tested.
1>Zone 1
Need Active
2. Walk along all detection points and make sure the detector is activated either
by walking in front of it or by opening a door or window.
Each activated zone is removed from the list on the display.
3. Return to the keypad and verify the result.
If the test is passed, the following message is displayed:
Walk test OK
Press Enter
Otherwise, there still is a list of untested zones. Contact the installer if you are
unable to pass the walk test.
See also “Performing a walk test” on page 19 for more information.
8.3 Manual test call
01>CS 1
02 CS 2
The Manual test call option allows you to test the central station reporting. Select
the central station. The panel now tries to establish a connection with the
selected central station.
The call progress status is shown on the display.
8.4 Siren test
1>Internal siren
2 External siren
The Siren test menu allows you to test internal and external sirens as well as
strobes.
Note: this function works only with certain settings programmed. Please contact
system installer to confirm that this function is available.