United Technologies Interlogix Advisor Advanced ATS1000A-SM, Руководство для менеджеров

Страница: 43 / 100

Advisor Advanced Manager Manual 35
User settings
7.0 Add user
Use to add a user. If the user is created successfully, the following message
appears:
INFO
User added
The new user is given the default name “User N” and placed on the end of the
user list. You can now start editing the user details for the new user.
7.n Edit user
Select a user to edit.
The following options can be configured.
7.n.1 User name
1 User name
>User 6 <
Press Enter to edit the name, or Clear to exit.
The default user name is “User N”, where N is the user number.
The name can have up to 16 characters.
7.n.2 PIN
1>Change PIN
***********
The PINs policy in the Advisor Advanced system can be configured in one of the
following ways:

PINs are generated by the system. The user can request a new PIN, but PINs
cannot be entered manually or edited.
A PIN is generated by selecting Yes and pressing Enter in this menu. The
generated PIN will show until Enter is pressed again.

PINs are entered manually.
Pressing Enter lets you enter or edit the PIN of the selected user.
Contact the system installer to set the PIN change mode.
PIN length is programmable in Advisor Advanced system. The number of
available PINs varies from 10000 (for 4-digit PINs) to 10000000000 (for 10-digit
PINs).
No PINs are reserved for system use. Any PIN can be generated or entered for
use. The system will not accept generate or accept entry of PINs already in use.