United Technologies Interlogix Advisor Advanced ATS1000A-SM, Руководство для менеджеров

Страница: 11 / 100

Advisor Advanced Manager Manual 3
(1) Blue LED Access granted
(2) Red LED On: area set
Flashing: general alert (EN 50131)
(3) Dual LED Green on: AC mains supply on
Green flashing: AC mains supply off, or unlocked while unset
Red on: all areas set
Red flashing: unlocked while set
(4) Yellow LED On: All zones are in normal state
Flashing: general alert (EN 50131)
(5) Red LED Flashing: alarm
(6) Numeric keys Keys 0 to 9, numerical data
(7) Off Unset an area
(8) On Full set an area
The LCD display
Messages are displayed on the liquid crystal display (LCD) on the keypad. They
guide you through the menu options and possible problems of the Advisor
Advanced system. The display is also used to show information you have
entered on the keypad.
The first line of the display shows system information and scrolls if there are
more characters than can be displayed, depending on the arming station type.
The second line or last line of the display shows instructions and characters you
enter on the keypad.
UTC F&S
TUE 29 Apr 08:55
Your system might display a custom message instead of the one shown above if
it has been programmed to do so, for example:
Main warehouse
TUE 29 Apr 08:55
The LEDs
The LEDs on the Advisor Advanced keypad and the information shown on the
display allow you to determine the system status at a glance. Not all LEDs are
available on all arming stations.
Area LEDs
The area LEDs, one for each of the possible security areas, indicate the status of
the particular area. The status of the area LED can be:
• On: The area is unoccupied and set.
• Off: The area is occupied and the security system has been set to allow
normal access.