United States Stove VOGELZANG VG5501S, Руководство пользователя

Страница: 3 / 52

-3-
Note: Register your product on line at www.usstove.com. Save your receipt with your records for any claims.
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with the Pellet Fuels Institute(PFI)
standard (minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less
than 8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million).
Pellets that are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced
performance. Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit
or within the space required for refuelling and ash removal. Doing so could result in a house fire. Do not over fire
or use volatile fuels or combustibles, doing so may cause a personal and property damage hazards.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a
manufactured or mobile home. Your stove is Certified to ASTM E1509-12 (2017)and Certified to ULC S627-00. This
manual describes the installation and operation of the Vogelzang, VG5501S wood heater. This heater meets the
2020 U.S. Environmental Protection Agency’s crib wood emission limits for wood heaters sold after May 15, 2020.
Under specific test conditions this heater has been shown to deliver heat at rates ranging from 13,281 to 27,492
Btu/hr. This heater achieved a particulate emissions rate of 1.0 g/hr when tested to method ASTM E2779-10 (*and
an efficiency of 69%).
Specifications
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%.
Use PFI listed fuel for best results.
Electrical Specifications
Electrical Rating
110-120 volts ac, 60 HZ, 3.0 Amps
Watts (operational) 125
Watts (igniter running) 310
Dimensions
Height
30.125” (766 mm)
Width 18.5” (47 mm)
Depth 20.375” (52 mm)
Weight 128lbs
Flue Size 3” or 4”
Heating Specifications
Fuel Burn Rate* (lowest setting) 1.5 lbs./hr. (0.7 kg/hr)
Burn Time (lowest setting)
13 hrs. (approximate)
Hopper Capacity 20 lbs. (9.1kg)
Flue Size 3” or 4”
WARNING: It is against federal regulations to operate this wood heater in a manner inconsistent with the
operating instructions in the owner’s manual.