8
© 2023 United States Stove Company
INSTALLATION
6. A ventilation system is installed in the house.
Slide the hose clamp over the aluminium flex pipe.
Then slide the flex pipe over the air intake tube of the
stove. Next tighten the hose clamp over the end of the
aluminium flex hose.
FOR USE IN MOBILE HOME/TRANSPORTABLE
BUILDINGS
• WARNING! DO NOT INSTALL IN SLEEPING
ROOM.
• CAUTION! THE STRUCTURAL INTEGRITY
OF THE MOBILE HOME/TRANSPORTABLE
BUILDING FLOOR, WALL, AND CEILING/ROOF
MUST BE MAINTAINED.
• INSTALL IN ACCORDANCE WITH 24 CFR, PART
3280 (HUD).
• USE A FACTORY BUILT CHIMNEY THAT
COMPLIES WITH UL 103 STANDARDS;
THEREFORE IT MUST BE A TYPE HT (2100°F).
• USE A SPARK ARRESTER.
• THE STOVE MUST BE ATTACHED TO THE
STRUCTURE OF THE MOBILE HOME/
TRANSPORTABLE BUILDING.
SECURING APPLIANCE’S WITH LEGS TO
THE FLOOR
1. The bracket engages around the square extrusion of
the leveling bolt inserted into the leg.
2. Once appliance is leveled, position the bracket and
attach to the floor using the appropriate hardware
needed for your specific flooring.
3. Install one bracket per leg or consult your local
authority having jurisdiction to determine how many
points of attachment are required.
In addition to the previously detailed installation
requirements, mobile home/transportable building
installations must meet the following requirements:
• The space heater is to be connected to a factory-built
chimney conforming to UL 103, Standard for 650°C
Factory-Built Chimneys.
• The heater must be permanently attached to the floor.
There are two holes in the pedestal base, use 3/8” bolts
through the floor.
• The heater must be electrically grounded to the steel
chassis of the mobile home/transportable building
with 8 GA copper wire using a serrated or star washer
to penetrate paint or protective coating to ensure
grounding.
• When moving your mobile home/transportable
building, all exterior venting must be removed while the
mobile home/transportable building is being relocated.
After relocation, all venting must be reinstalled and
securely fastened.
• Outside Air is mandatory for mobile home/transportable
building installation. See your dealer for purchasing.
• Check with your local building officials as other codes
may apply.
• Only use the specified components listed in this manual
for this unit. The use of components that are not meant
for this unit can cause unsafe conditions.
