4
© 2021 United States Stove Company
ASSEMBLY INSTRUCTIONS
TOOLS AND MATERIALS
• One 1/2” opened ended wrench
• One 7/16” open ended wrench
• One 3/4” socket and ratchet wrench
• Screw gun (cordless is recommended)
• One 5/16” nut driver (extension is recommended)
• One torpedo level
• Needle nose pliers
CAUTION:
THE APPLIANCE IS VERY HEAVY. THE ASSISTANCE
FROM A SECOND PERSON IS STRONGLY
SUGGESTED. PLEASE USE PROPER LIFTING
TECHNIQUE WHEN POSITIONING THE APPLIANCE
FOR ASSEMBLY AND INSTALLATION.
MAIN BODY ASSEMBLY
1. Prepare a solid flat work surface. Lay the main stove
body on the work surface. Position the stove so that
the legs are hanging off of the surface approximately
six inches.
2. Install the base as shown with the two (2) 7/16” hex
bolts, two (2) flat washers, and two (2) lock washers
provided with your stove. Note: There is a long end
and a short end to the base. To ensure stability of the
stove, the long end must face the right side of the
stove.
PELLET SLIDE INSTALLATION
Install the pellet slide as shown. The chute (flat end) will
go in first. The pellet slide will slide in and seat at the
bottom of the feed tube.
Feed
Tube
Pellet
Slide
DAMPER SLIDE INSTALLATION
1. Insert the damper slide into place; it will only fit one
way.
Damper
Slide
FOR CUSTOMER SERVICE CALL: 800-750-2723 EXT 5050