4
Congratulations!
Thank you for purchasing United Security Products, Inc.’s
Emergency Caller
- the “smartest”, most
comprehensive automatic voice/pager emergency dialer available. Representing an exciting new level of
achievement,
The Emergency Caller
combines technologically advanced features, ease of programming and
reliable operation in a compact, unobtrusive dialer. Installation and hookup are quick and easy. The unit is a
stand-alone wireless device that simply connects to an ordinary telephone jack. The keypad cover glides on and
off for added attractiveness and security.
How It Works:
The Emergency Caller
features busy-line and no-answer detection to ensure prompt transmission of the
prerecorded message to as many as 4 standard telephones, cellular phones, voice and/or numeric pagers.
Message to both local and long-distance calls can be transmitted. When activated, the dialer instantly begins
calling the numbers in sequence, in an attempt to deliver the message or pager code.
The Emergency Caller
is
extensively programmable, offering personalized customization to fulfill virtually any residence. Plain-English
prompts walk the user through the process in a timely manner.
Programming options abound, allowing the user to:
•
Store up to 4 telephone/pager numbers.
•
Store an emergency message (maximum: 20 sec.).
•
Select Tone/Pulse dialing, Standard telephone line/PBX system and Momentary/Continuous activation.
Special Features:
•
The dialer will “beep” every 30 seconds in the Program and Test mode. This is to warn the user that the
dialer is not in the Operate or Off mode.
•
In the Test mode, when testing the input, the dialer will check to make sure that there is a dial tone. If no
dial tone is detected, the dialer will not continue testing the input and will display:
NO DIAL TONE!
(Connect the dialer to the telephone line and re-test the input).
Note: Although the dialer checks for a dial
tone it will not actually dial out.
•
The dialer will check to make sure that, at least, one telephone number and OGM or one pager number is
programmed before allowing the dialer to be switched to the Operate mode. If programming is not
complete, the dialer will display:
PROGRAMMING IS
NOT COMPLETE!
(After 2 seconds the dialer will automatically switch to the Programming mode).
Please Familiarize Yourself With These Instructions Before Installation/Operation. This guide describes how to
program and operate the dialer. We strongly recommend that you read the entire manual before attempting to
use the unit.
To enhance ease of programming and operation, this guide includes:
•
A Programming Sample/Quick Setup review on page 20 with a corresponding Program Planner.
•
A Blank Program Planner on page 21. One copy of this Planner should be kept in a safe place by the end
user. A separate copy should also be retained by the installer.
The Emergency Caller…
Gets Help Fast!