15
Programming Auxiliary Information
The dialer is preset at the factory to typical telephone line (T-LINE), Tone/Pulse and PBX options. If you
choose to accept the following default prompts, simply press “2” to scroll to the next section.
If your phone
system requires dialing a digit to get an outside line or dial tone, similar to PBX, then turn PBX on and
enter digit to program.
PRESETS
T-LINE…………….TONE
PBX………………….OFF
To change the presets, follow these steps.
Programming And Recording Your Outgoing Message
Follow these steps to program and record your outgoing message. Skip this portion if you have programmed in
only numeric pagers, which rely on coded DTMF messages. As with all
Emergency Caller
programming, the
unit need not be connected to a phone line when information is programmed in. Remember that “OGM” stands
for outgoing message.
Total OGM time is 20 seconds.
Typically the dialer is programmed to notify family, friends or another responsible party. Before programming
your dialer to call the police, fire department or 9-1-1 directly, you must check with these agencies for their
approval.
STEP 1
Before programming, write down all your message. Time the message carefully to fit in the alotted time
frame. Practice saying the message, clearly enunciating the message for
maximum clarity in case of an
emergency. Keep a final recording script.
STEP 2
Program your OGM.
A)
The LCD will read:
PROGRAM: OGM
1(YES) 2(NO)
B)
Press “1” to program your OGM. Press “2” to scroll to the next section.
NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEY REPEATEDLY AND
RETURN TO THE “PROGRAM MODE”, THEN SELECT THE SECTION TO CHANGE
(“1” ACCEPT SECTION, “2” FOR NEXT SECTION), THEN ENTER CORRECT
INFORMATION.
T-LINE
The LCD will display:
PROGRAM: T-LINE
1(YES) 2(NO)
Press “1” to program T-LINE.
Press “2” to scroll to the next section.
The LCD will display:
PROGRAM: T-LINE
1(TONE) 2(PULSE)
Press “1” for TONE. Press “2” for PULSE.
PBX
The LCD will display:
PROGRAM: PBX
1(ON) 2(OFF)
Step 1:
Press “1” for ON. Press “2” for OFF.
Step 2:
If “1” is entered, the LCD will display:
PROGRAM: PBX
ENTER PBX NUMBER
Enter PBX number (1 digit).
P r o g r a m m i n g
T h e E m e r g e n c y C a l l e r
