14
Example:
To store numeric pager number 555-1212, a 4-second Pause and code 3456:
Press:
NOTE:
SOME PAGER SERVICES REQUIRE A “#” SIGN FOR SEPARATION OF THE NUMERIC CODE
OR AT THE END OF THE NUMERIC CODE FOR PROPER TRANSMISSION.
STEP 3B – TELEPHONE NUMBERS
If you pressed “2” and wish to program in a telephone number…
Press the digits of the number to be dialed. For long-distance numbers, first press “1” followed by the area code
and then the number. The number will appear on the LCD.
Press “*” to store the sequence.
Example:
Store telephone number 1-800-555-1212:
Press:
REMEMBER/NOTE: Before programming your dialer to call the police, fire department 0r 9-1-1
directly, you must check with these agencies for their approval.
STEP 3C – VOICE PAGERS
If you pressed “2” and wish to program in a voice pager…
Press the digits of the pager to be called.
Press “P” one or more times in accordance with the number of seconds needed to accommodate the pager.
(Remember each “P” provides a 2-second pause).
Press “*” to store the sequence. The number will appear on the LCD.
Example: To store voice pager 555-1212 and a 4-second pause:
Press:
STEP 4
Repeat steps 1-3 for each number to be programmed in each location. Select any of 4 location numbers
in Step 1 (SELECT: 1-4) for each number to be programmed.
STEP 5 When you are done programming all desired telephone and/or pager numbers, press “0” to exit
this section.
P r o g r a m m i n g
T h e E m e r g e n c y C a l l e r
NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEY REPEATEDLY AND
RETURN TO THE “PROGRAM MODE”, THEN SELECT THE SECTION TO CHANGE
(“1” ACCEPT SECTION, “2” FOR NEXT SECTION), THEN ENTER CORRECT
INFORMATION.
