PROBE BUDDY – USER MANUAL
Page 7 of 27
UPC_MAN013_R7
Copyright © United Process Controls.
All rights to copy, reproduce and transmit are reserved.
Enter / ON
starts up the simulator and allows data entry in the setup mode. Press and
hold the Enter key for 1 second to turn on and 5 seconds to turn off. The Enter key
sets values or parameter selections, once required changes have been made. The
Enter key will shift to different display windows when the PROBE BUDDY is in output
mode.
Left Arrow
moves the digit cursor to the left in output mode or moves left through the
main menu selection in setup mode.
Down Arrow
deceases the selected digit value in output mode or moves down the
selected setup menu.
Up Arrow
increases the selected digit value in output mode or moves up in the
selected setup menu.
Right Arrow
moves the digit cursor to the right in output mode or moves right through
the main menu selection in setup mode.
1.3.2 Dual Key Functions
Enter / ON + Right Arrow
Pressing the Enter and Right Arrow keys simultaneously starts or stops the sensor test.
Enter / ON + Left Arrow
Pressing the Enter and Left Arrow keys simultaneously opens the Service mode on the
PROBE BUDDY.
Normal Operation
The following figure shows the PROBE BUDDY display layout.
