@
+91 7046223333 , 9427301436
www.utplindia.in
www
8
UT-30X
UT-100X
MULTI CHANNEL UNIVERSAL PROCESS INDICATOR
CONTROLLER/SCANNER/DATALOGGER
‘Configuration Mode’ will shown by pressing
&
key in the Normal mode..
4.1 Configuration Mode
4. OPERATIONAL MODES
j. TC
: ‘J’ Type Thermo-Couple
: ‘K’ Type Thermo-Couple
: ‘R’ Type Thermo-Couple
: ‘S’ Type Thermo-Couple
: ‘T’ Type Thermo-Couple
: Linear 4 - 20 mA DC
: Linear 0 - 20 mA DC
: Linear 0 - 10 VDC
: Special Input [RH etc.]
: RTD PT-100
k. TC
R. TC
S. TC
T. TC
4-20
0-20
-10v
SpCL
rtd1
Range : Input type is as follows :
Range / Values
Parameter
pass
0000
CONFIGURATION MODE PASSWORD
Password for Config. Mode Parameters
Display
Scroll the digit by key, Increase by key.
Range : Values between
to
0000
9999
Default Input :
, It can be change as reqd.
RtD1
1P-1
rtd1
CHANNEL:1 INPUT TYPE
Selection of the applied Input.
Change the type Up by key, Down by key.
Default Value :
0000
Values :
Default Value :
H-on
: No decimal
(1234)
00
: Active in High
H-oN
: Active in Low
L-oN
: One decimal (123.4)
01
: Two decimal (12.34)
02
: Three decimal(1.234)
03
Increase by key, Decrease by key.
dp1
01
CHANNEL:1 DECIMAL POINT [LINEAR INPUT]
Decimal Point resolution for display value.
Values :
Default Value :
01
NOTE :
Applicable for Analog Linear input only.
Range : Input type is same as Input-1
Default Input :
RtD1
It can be change as reqd.
1P-2
rtd1
CHANNEL:2 INPUT TYPE
Selection of the applied Input.
Change the type Up by key, Down by key.
Increase by key, Decrease by key.
dp2
01
CHANNEL:2 DECIMAL POINT [LINEAR INPUT]
Decimal Point resolution for Linear I/P display.
Values : Same as
of Input-1
DP1
Default Value :
01
Range : Input type is same as Input-1
Default Input :
RtD1
It can be change as reqd.
1P-3
rtd1
CHANNEL:3 INPUT TYPE
Selection of the applied Input.
Change the type Up by key, Down by key.
dp3
01
CHANNEL:3 DECIMAL POINT [LINEAR INPUT]
Range : Input type is same as Input-1
Default Input :
RtD1
It can be change as reqd.
1P-4
rtd1
CHANNEL:4 INPUT TYPE
Selection of the applied Input.
Change the type Up by key, Down by key.
dp4
01
CHANNEL:4 DECIMAL POINT [LINEAR INPUT]
ALARM 1 LOW ACTION TYPE
Change the type by
or
key.
ON
OFF
PV
SV
ON
OFF
PV
SV
L-ON :
H-ON :
SV-Hyst
SV+Hyst
Increase by key, Decrease by key.
Decimal Point resolution for Linear I/P display.
Values : Same as
of Input-1
DP1
Default Value :
01
Increase by key, Decrease by key.
Decimal Point resolution for Linear I/P display.
Values : Same as
of Input-1
DP1
Default Value :
01
ty11
H-on
Содержание UT-30X
Страница 17: ......
