![background image](http://html1.mh-extra.com/html/unitec/mab-150/mab-150_operating-instructions-manual_3983432014.webp)
1 6
U s e
M A B 1 5 0
ENGLISH
R e m o v i n g t h e t o o l
Extend the tool mount (2) with the
hand lever (6) until both Allen screws
in the tool mount (2) are freely
accessible.
Loosen both Allen screws in the
tool mount (2) using the SW 4 offset
screwdriver supplied.
Take out the core drill (1) from below.
U s e
A c t i v a t i n g / d e a c t i v a t i n g t h e
m a g n e t i c c l a m p
CAUTION
D a m a g e t o p r o p e r t y !
To avoid damage to the machine by
overheating of the magnets:
►
Only switch on the magnetic clamp
when the machine is on a magnetic
surface.
A c t i v a t i n g t h e m a g n e t i c c l a m p
Switch on the magnetic clamp with the
switch (10). The indicator lamp in the
switch (10) lights up.
NOTE
►
The maximum magnetic clamping
force is only available after switching
on the motor.
D e a c t i v a t i n g t h e m a g n e t i c c l a m p
Hold the handle tightly (5) to stop the
machine from slipping.
Switch off the magnetic clamp with the
switch (10). The indicator lamp in the
switch (10) extinguishes.
Содержание MAB 150
