Unitec MAB 150, Руководство по эксплуатации

Страница: 11 / 57

1 3
P r e p a r a t i o n
M A B 1 5 0
ENGLISH
C o m p o n e n t s / d e l i v e r y
c o n t e n t s
M a c h i n e o v e r v i e w
1 Core drill
(not supplied as standard)
2 Tool mount
3/4" Weldon (19 mm)
3 Gearbox
4 Connecting nipple
for cutting oil/drilling emulsion
(covered)
5 Handle
6 Hand lever (can be attached on both
sides)
7 Drive engine
8 Operating panel (covered)
9 Magnetic foot
10 Magnet ON/OFF switch
11 Motor switch
Green = motor on
Red = motor off
12
D e l i v e r y c o n t e n t s
MAB 150 magnetic core drilling
machine
Transport case (not illustrated)
A ZAK075 ejector pin
B Safety chain
C ZKP 100 pump bottle
for cutting oil/drilling emulsion
SW 4 offset screwdriver
(not illustrated)
O p t i o n a l a c c e s s o r i e s
Y Attachable ratchet
(can be attached on both sides)
Z ZHS 400 high-performance grease
spray
Before using for the first time
T r a n s p o r t i n s p e c t i o n
As standard, the machine is supplied with
the components indicated in the Delivery
contents
section.
NOTE
► Check for visible signs of damage or
missing items on delivery. Report an
incomplete or damaged delivery to
your supplier/retailer immediately.
P r e p a r a t i o n
This section contains important instructions
on the required preparation before
beginning any work.
A d d i t i o n a l s a f e t y m e a s u r e s f o r
c e r t a i n w o r k
Additional safety precautions must be
taken for the following operations with the
machine:
No n - h o r i z o n t a l w o r k p o s i t i o n
W A R NING
R i s k o f i n j u r y f r o m a f a l l i n g m a c h i n e .
When working in inclined or vertical
position and during overhead work, the
machine must be secured to prevent it
from falling using the safety chain (B)
supplied.
► Check the safety chain for proper
function before every use. A damaged
safety chain must not be used.
Replace a damaged safety chain
immediately.