Point-It! Pro Quick Guide
November 2021
Unique Perspectives Ltd.
www.housemate.ie ● [email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: +353 56 7725913
Page 11 of 12
Maintenance
The Point-It ! should be regularly checked for integrity. Loose, damaged or corroded connectors or
terminals, or damaged cabling should be reported to your Service Centre and be replaced
immediately.
The USB charging cable of Point-It ! should be regularly checked for integrity.
The Lithium battery, if fitted, should be regularly checked for corrosion or leakage. Occasionally
remove the cover and check for leakages, corrosion and evidence of over-heating.
If you are not using your Point-It! for an extended period disconnect the battery.
All switches connected to the Point-It ! should be regularly tested to ensure that they function
correctly.
The Point-It ! should be kept free of dust, dirt and liquids. If necessary wipe with a cloth dampened
with warm water or alcohol.
Do not
use solvents or abrasive cleaners.
Where any doubt exists, consult your nearest Service Centre or Agent.
There are no user-serviceable parts within the Point-It !. Do not attempt to open the case except to
inspect or disconnect the battery.
In accordance with the requirements of CE marking of this device and the Company’s policy, it is
requested that re-occurring faults or defects be reported back to Unique Perspectives Ltd.
Safety & Misuse
Do not install, maintain or operate the Point-It ! without reading, understanding and following the
proper instructions and manuals, otherwise injury or damage may result.
Do not operate the Point-It ! if it behaves erratically, or shows abnormal response, heating, smoke or
arcing. Turn the unit off, disconnect all cables, disconnect the battery, and consult your service
agent.
Ensure the Point-It ! is turned off when not in use and never leave the Point-It ! and associated PC or
MAC switched on or plugged into the mains unattended or overnight.
No connector pins should be touched, as contamination or damage due to electrostatic discharge
may result.
Point-It is designed to resist water penetration. However, if a spillage occurs Turn the unit off,
disconnect all cables, and consult your service agent. Once turned off any spillage over the Point-It !
should be wiped dry without delay. The Point-It ! may not be used outdoors.
