Point-It! Pro Quick Guide
November 2021
Unique Perspectives Ltd.
www.housemate.ie ● [email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: +353 56 7725913
Page 10 of 12
Mounting
If necessary, the Point-It! can be mounted with a suitable mounting kit using M4 screws. The choice
and construction of the mount will depend upon the user’s needs. Suitable mounting plates and
brackets are available from
www.rehadapt.com
.
Rehadapt L3D GA mounting plate
Rehadapt TC L3D mounting system
Warning !!
For safe installation, select a screw length between 6mm and 10mm to attach the
Point-It! to the mounting plate.
Twister Switches
The Point-It! can be supplied with Mo-Vis “Twister” switches (
www.mo-vis.com
) and a rotatable
mounting ring as shown below. Together these accessories enable you to position a switch in almost
any position. Loosen the mounting ring with the Allen key provided to rotate the ring about the body
of the Point-It! or to raise, lower or rotate the switch.
