Unipro UniTire, Руководство пользователя

Страница: 14 / 28

14
Operating modes
R e f e r e n c e
G u i d e
SEQUENCE MODE
If you want to measure the pressure in all tires
and store them for later recall, the sequence
mode is used. To start in sequence mode, turn
UniTire on by pressing the
left button ( ).
In sequence mode you will be guided through
all the tires (2 or 4 depending the target mo-
torsport). you will have to select the sequence
you want once in setup mode. Please see
”SEQUENCE SETUP” on page 18.
Digital mode
The text above the pressure value is showing
the tire you are supposed to measure. Below
the line you will see an arrow showing which
way you have to go around to measure the
tires. The start of the line shows the first tire in
the sequence.
To help you with the sequence, you will find an
indication on where you are in the progress.
On the example above , you are measuring tire
2 out of 4.
When you have adjusted the tire pressure, just
press the
right
button ( ) to store the value
and move on to the next tire.
If you want to start over (clear what you have
done and start with the first wheel in the
sequence), press and hold the left button ( 3 )
down until the text shows the first tire again
and the progress is showing either 1/4 or 1/2.
Analog mode
The text in the upper part of the display is
showing the tire you are supposed to measure.
The current tire pressure is shown both with on
the analog scale and as a digital value in the
lower part of the display. Use the analog scale
for fast readout and then the digital value for
the very precise and final readout.
The maximum value on the analog scale is
adjustable. Please see ”MAX RANGE SETUP”
on page 19.
you want to have the maximum value as low
as possible to make the scale as detailed as
possible. That way you will get a better resolu-
tion between the lines and it will be easier to
adjust the pressure using the analog scale.
When you have adjusted the tire pressure, just
press the
right button ( ) to store the value
and move on to the next tire.
If you want to start over (clear what you have
done and start with the first wheel in the
sequence), press and hold the left button (
3
)
down until the text shows the first tire again.