Unipro UniTire, Руководство пользователя

Страница: 16 / 28

16
and the progress is showing either 1/4 or 1/2.
Analog mode
The text will show which tire you are supposed
to adjust. To the right you will see the bar
graph showing how close you are to the target.
If you are too low, lOW will be highlighted and
if you are too high, HIGH will be highlighted.
When you are within 2% of the selected target,
SPOT ON will be highlighted. The range of the
bar graph is +/- 20%. The small square will
indicate the current pressure compared to the
target.
To the left you will see between zero and three
arrows pointing up or down. These arrows are
a rough indication on how far away from the
target the pressure is. They are pointing in the
directing you need to go. If they are pointing
up, you need to add more air, and if they are
pointing down, you need to let more air out.
Three arrows means more than 100% away,
two arrows means more than 50% away and
one arrow means more than 10% away. If you
are within 10% of the target, no arrows will
be shown.
When you have adjusted the tire pressure, just
press the
right button ( ) to store the value
and move on to the next tire.
If you want to start over (clear what you have
done and start with the first wheel in the
sequence), press and hold the left button (
3
)
down until the text shows the first tire again.
Operating mode
R e f e r e n c e
G u i d e