Unipro UniTire, Руководство пользователя

Страница: 25 / 28

25
Service
The Unipro UniTire pressure gauge has been
carefully designed to give years of untroubled
service. There are no userserviceable
parts inside the case, nor do the units require
any form of maintenance.
In the unlikely event that your product fails to
function correctly, it should be returned, in its
original packaging, to your Unipro dealer.
In case of difficulty within Denmark please
contact the appropriate sales and service ad-
dress shown on page IV.
In case of difficulty outside Denmark, contact
the importing agent for the territory. A list of
Unipro dealers outside Denmark is available
from Unipro ApS.
No responsibility can be accepted for the
product whilst in transit to the factory or an
dealer, and customers are therefore advised to
insure the unit. When seeking service under
guarantee, proof of the date of purchase will
be required.
Guarantee
The product is guaranteed against defects in
material and workmanship for two years from
the date of purchase.
The guarantee is void if the product has been
subject to misuse, accident, or negligence,
or has been tampered with or modified in
any way without the written authorisation of
Unipro ApS. Note: Connecting anything other
than the UniTire handle to the cable may
cause damage to the product which will not be
covered by this guarantee. Attempted servicing
by unauthorised people may also invalidate
this guarantee. labour and carriage charges
are not covered unless by local agreement.
Outside Denmark, local warranty liability is
restricted to equipment purchased within the
territory. Our agents outside Denmark are only
under contractual obligation to service under-
guarantee equipment sold through them. They
are entitled to make a non-refundable charge
for any service carried out on other equipment.
This guarantee does not limit your statutory
rights within the country of purchase.
Service and guarantee
T r o u b l e -
s h o o t i n g