Unipro UniTire, Руководство пользователя

Страница: 10 / 28

10
Quick guide
Q u i c k G u i d e
STORING THE TIRES IN
SEQUENCE MODE
If you started in “sequence mode”, the screen
will show the current tire pressure for the cur-
rent tire. The screen will inform you on which
tire you are supposed to measure. When the
right button ( ) is pressed, the current tire
pressure is stored and UniTire shows the next
tire in the selected sequence.
The tire sequence is set in the setup mode. This
is described in ”SEQUENCE SETUP” on page
18.
RECAll MODE
From “sequence mode” a press on the left
button ( ) will bring you in “recall mode”.
From this screen you can analyse the tire
pressure values you have measured earlier. The
screen will list 4 set of tires. Depending on the
selected sport, it will be either two or four tires.
The tires are listed in the same sequence as
selected in setup mode.
The bottom of the screen will show the current
page and the total number of pages. UniTire
can store up to 20 set of tires, filling 5 pages.
To go to the next page, press the
right
button ( ).
The pressure values are shown in the same unit
as selected in setup mode and the unit is show
on the bottom line.
ClEARING STORED
PRESSURE VAlUES
If you want to clear the tire measurements
stored you can do it by pressing and holding
down the left button (
3
) from “recall mode”.
you can do the same in “pressure mode” to
clear the history list.
SETUP MODE
To change setting and options go to setup
mode. This is done by pressing both the
left
and the right button (
1
+
1
) either when
turning UniTire on or during normal operating.
For more information on setup mode, please
see ”Operating modes” on page 15.
TURNING UNITIRE OFF
Pressing the right button ( 3 ) and holding
it down will turn UniTire off. When you see
“POWER OFF” in the display, you can release
the button again.
UniTire will also turn itself off if no button is
pressed and no pressure is detected after a
preselected time.
BUIlT-IN HElP MODE
When you turn UniTire off and “POWER OFF” is
displayed you can press the left button ( ) to
display the built-in help. you need to press the
button before releasing the right button.
When in help mode, the right button ( )
will show the next help page and the
left
button ( ) will show the previous help page.
To leave help mode, turn UniTire off.
That’s how easy it is – if you are ready for
some more advanced features, then read the
Reference Guide following this section.