13
PRESSURE MODE
The regular tire pressure gauge simply shows
the current tire pressure and continuously
updates when air is released by pressing one
or both of the valves on the pressure handle.
Keep pressing the
right
button (
3
) at startup
to go directly to Pressure mode.
In Setup mode you can choose if you want
to have the pressure values shown as digital
numbers or as a classic analog gauge.
Also in Setup mode, you can choose if you
want to show the pressure value in bar, psi,
mbar, HPa or Torr.
The chosen unit is shown in the square
brackets in the bottom line of the display.
Digital gauge mode
The digital gauge mode can show both the
current pressure value and a ”history list” with
the last 4 saved pressure values.
To save a current pressure value in the history
list, simply press the
right
button ( ).
Digital view with large current value and
small history list values.
Each time a new pressure value is put in the
history list, the oldest one drops off the list.
The newest value is at the top. This order is
also indicated by the arrow in the right side of
the display.
The history list will be saved even when UniTire
is turned off.
If you want to clear the history, press and hold
down the
left
button (
3
) until the history list
disappears.
Analog gauge mode
Because of the graphical display, it is possible
to emulate a classic analog gauge. The scale
goes from 0 to the maximum value defined
in Setup mode (see ”MAX RANGE SETUP” on
page 20.
Analog view with 1 bar chosen as max
range, and a current pressure of 0.57 bar.
Depending on the maximum range, a number
of lines divides the scale to make it fast and
easy to see the current pressure. The current
pressure value is also shown as a precise
number in the display.
Make the maximum range value as low as pos-
sible to make the scale as detailed as possible.
This gives a better resolution between the
lines, making it easier to adjust the pressure
while using the analog scale.
Operating UniTire
R e f e r e n c e
G u i d e
