Unipro 03-05-001, Руководство пользователя

Страница: 37 / 56

37
1. Press the mode button ( ) shortly to start
the Laptimer manually.
2. Start the engine and UniGo will start when
it detects the RPM signal.
UniGo starts by showing the startup screen
including information about firmware version
number, battery voltage, memory used and
the environment temperature. It will also show
the temperature sensors connected and what
type they are.
The startup screen will show an animated
Unipro logo and the owners name. It is
possible to add your own logo instead of the
Unipro version.
Startup screen with information about
UniGo and temperature sensors.
When UniGo is starting up you can press
different buttons to go directly to different
screens. Pressing a button will also skip the
startup screen.
• Press the mode button ( ) to go direct-
ly to run mode.
• Press the back button ( ) to go directly
to analyze mode with the latest session
selected.
• Press the menu button ( ) to go direct-
ly to the main menu.
You can add your own startup picture.
Just copy a 4 bpp bitmap files called
“startup.bmp” into the /Pictures folder.
The size should be 135 x 160 pixels.
TURN UNIGO OFF
Press the top right button and hold
it down to turn UniGo off. When you see
“POWER OFF” in the display, you can release
the button again.
Power off screen when holding down the
top right button.
UniGo will also turn itself off if no button
is pressed and no RPM, speed or trigger is
detected after a preselected time. Please see
”AUTO POWER OFF TIME” on page 31.
BUILT-IN HELP
When you move around in menus, UniGo will
display one line of help text at the bottom of
the display. Use this line to get familiar with
the different settings in UniGo.
Example on the help text describing the
current selection.
WARNING LEDS
The warning LEDs are an important features of
the Laptimer. A total of five LEDs are located
at the top, and the idea is to warn the driver
about something that needs attention.
Operating UniGo
R e f e r e n c e
G u i d e