background image

49

Change to the next screen by pressing the 

mode

 button ( ).

IR Box with asphalt temperature sensor and 

pressure sensor 

showing real time values.

LEARN TRACK

 This feature is not yet implemented !.

RPM SENSITIVITY

 This feature is not yet implemented !.

USB MODE

UniGo is using a full-speed USB connection 
to either a PC or a MAC computer. The good 
thing is, that you do 

not

 need to install any 

driver to communicate with UniGo One.
When the USB cable is connected, UniGo will 
show the following screen.

USB screen when the USB cable is connect-
ed.

When UniGo is connected with USB, it 
cannot be operated anymore.

To leave USB mode again, just unplug the 
USB cable. Please remember to safely eject 

UniGo on the computer before removing the 
cable like any other USB flash drives. This will 
prevent the flash from being corrupted.
The Unipro Analyser program do have an eject 
button to make this easy.

FIRMWARE UPDATE

Updating the firmware is very easy on UniGo. 
You will not need any special software except 
the new firmware file from our homepage. 
The firmware file is called something similar 
to “unigo_one_release_rev_xxyyzzz.bin” 
where the xxyyzzz is the version number of 
the firmware. Simply copy this file into the 
folder called “Firmware” on UniGo when it is 
attached to the computer and it will start the 
update process when you unplug the cable 
again.
When UniGo detects this file in the firmware 
folder, it will show the following screen.

Update screen when new firmware is found.

If you want to upgrade (or downgrade) the 
firmware to the version shown on the screen, 
simply press the 

ok

 button ( ). If you want 

to keep the current firmware, press any other 
button will skip the firmware update process. 
This screen will only be shown for 20 seconds. 
If you do not push any buttons it will skip the 
update automatically.
If you chose to upgrade the firmware, UniGo 
will check the file and unpack all the files. 
When this is done the update of the firmware 
itself starts. When it is done UniGo turns off.

Operating UniGo

R e f e r e n c e 

G u i d e

Содержание 03-05-001

























































Отзывы: