Unipro 03-05-001, Руководство пользователя

Страница: 15 / 56

15
Cylinder head temperature sensor mounted
below the spark plug.
Before mounting the cylinder sensor, remove
the washer from the spark plug.
EXHAUST TEMPERATURE
The exhaust sensor is mounted in the exhaust
pipe. The fitting for the exhaust sensor is
welded to the exhaust 12 cm (4.7 inch) from
the backside of the piston. That way the sensor
measures the temperature of the gas and not
the flames.
Start by welding the exhaust fitting to the
exhaust pipe and then drill a ø4.5 mm hole
through the fitting for the sensor.
Always check if local regulation might
prevent you from using an exhaust tem-
perature sensor in the race.
Drill a ø4.5 mm hole for the sensor through
the exhaust fitting.
Exhaust fitting welded on the exhaust pipe.
Place the exhaust sensor in the fitting and
fasten the nut. Do not tightening it too much.
I n s t a l l i n g t h e
L a p t i m e r
Installation