Uniphos FumiSense Pro UNIPHOS-250, Инструкция по эксплуатации

Страница: 9 / 25

9
3
.
Instrument Operation
Press and hold the SET Key for 3-4 seconds to turn ON the instrument. A green LED marked
POWER on the front panel of the Instrument glows, confirming the same. Instrument can be
turned OFF by pressing set and confirming the turn OFF by ENTER key.
Note: Fully charge the unit before use. Charge the unit till RED Led on charger turns
GREEN, before using it for measurement.
3.1 INITIALIZATION
Once instrument is turned ON, it goes into the initialization and following prompts will appear
in the sequence on the display.
(Instrument Turn ON)
(Instrument Model and Serial number)
(Instrument software version)
(Range and Resolution, Current date and time)
(Last calibration date)
(Menu Page)
INSTRUMENT STARTS
IN
3 .. 2 .. 1 .. 0
SOFTWARE VERSION:
X.XX.XXX
RANGE: 0 - XXXX PPM
RESO. : XXX PPM
DATE: DD/MM/YY
TIME: HH:MM:SS
UP – SAMPLING
DN – CALIBRATE
SET – SETTINGS
ENT – DWNLD/RST
LAST CALIBRATION
DATE: DD/MM/YY
UNIPHOS-250
FUMISENSE PRO
SERIAL NUMBER
A-XXXX(PM)