Uniphos FumiSense Pro UNIPHOS-250, Инструкция по эксплуатации

Страница: 16 / 25

16
11. Click the OK Button. A blinking cursor will now appear on the New Connection
(say ABC) Window.
4.
Now the data in the memory of the equipment can be downloaded to the PC by pressing
UP key. The records will appear on the new connection window.
5.
Press the DOWN key if the data from the instrument memory is to be erased.
6.
Press SET key to escape from this page and to move to the main menu page
5. How to Monitor Battery Charge Level
The battery charge level can be viewed on the LCD/OLED panel when the instrument is in
main Data Downloading page.
The LCD/OLED will indicate the battery charge level in terms of %, below the battery prompt as
following.
Battery status can only be monitored when the instrument is in the Data downloading page.
When the battery capacity goes below 25%, the LOW BATTERY prompt will be displayed on
LCD/OLED and instrument will prompt the menu page only after charging the battery. Battery
should be charged for 2 to 3 Hours.
Battery
XXX %