Uniphos FumiSense Pro UNIPHOS-250, Инструкция по эксплуатации

Страница: 6 / 25

6
2. SAMPLING LED:
The sampling LED glows, when the instrument is in measurement mode.
3. UP KEY:
a) Menu page: Press this key to enter into the Sampling/Purging mode (either Batch or
continuous).
b)
Parameter Set Mode: In this mode, the key is used to increase the value of the digit
below which the cursor is placed.
c) Calibration Mode: In this mode, the key is used as increment key.
d) Data downloading mode: Press this key to download all the stored
data/records to the PC.
4. DOWN KEY:
a) M
enu page: Press this key to enter into calibration mode.
b) Parameter Set Mode: In this mode, the key is used to move the cursor horizontally
over different digits.
c) Calibration Mode: In this mode, the key is used to shift the cursor.
d) Data downloading mode: In this mode, if DOWN key is pressed, all the stored data will be
deleted from the
instrument’s memory.
∆
CAUTION : One should be careful before pressing DOWN key in the Data
Downloading Mode, as the data logged so far into the internal memory of the instrument
will be lost permanently.
5. SET KEY:
a) Menu page: Press this key to enter into the Parameter Set Mode and to turn OFF the
instrument.
b) All other modes: Press this key to escape from the current page and to move over to the
next page.
6. ENTER KEY:
a)
Menu page: Press this key to enter into the data downloading mode.
b) All other modes: To confirm the selection of mode and value of the parameter chosen or
to confirm the desired / selected operation.
7. OLED DISPLAY:
It is a 20 X 4 alphanumeric OLED display, which indicates

Various prompts during initialization process, immediately after turning ON the unit.

Gas concentration in the Measurement mode.

User settable parameters during Parameter Set mode.

Calibration data viz. zero
– span counts during Calibration mode.

User friendly prompts during Sampling, Calibration, Data Downloading and other
Functions.