unipad UPAD ES-909, Руководство пользователя

Страница: 18 / 29

The outdated conductive gel will affect the EMS output performance and may
cause skin discomfort. Please clean and replace the conductive gel regularly to
maintain the device’s best performance.
●
Conductive gel sheet is a consumable item. To ensure that the device can
have the best performance all the time, new conductive gel should be replaced
regularly.
●
The viscosity is weakened, and the adhesive surface (conductive gel surface) is
damaged, or stains that cannot be removed. Be sure to replace it with a new
one.
●
Do not use any paper or fabric to wipe the conductive gel, as this will affect
the life cycle of it.
●
The conductive gel contains the moisture material. If the storage
environment is too dry, it will affect the life cycle of it. After using the product,
keep it in the dedicated storage bag.
● If you feel stinging pain & discomfort during the usage, please replace the
gel sheet immediately.。
1. It is recommended to use the "diagonally push & roll" method to gradually
push the gel sheet from the device. Do not try to directly tear it off.
2. At last, the removed conductive gel can be used to stick up the small pieces of
remaining gel on the rubber.
●
Please make sure that the power is turned off before the
maintenance. There’ll is a risk of electric shock if you proceed the
maintenance when the power is on.
●
Do not rinse or wipe with the paint thinner, detergent or alcohol.
●
Make sure your hands are clean before touching the conductive gel
sheet.
●
It is forbidden to wipe the surface with the lint-free paper towels
and fabrics.
●
Do not place it in direct sunlight or excessively dry environment.
16
Regularly renew your conductive gel
How to remove the conductive gel correctly