unipad UPAD ES-909, Руководство пользователя

Страница: 12 / 29

The conductive gel sheet can evenly conduct the energy of
the electrode area to the skin. It’s essential to paste the gel
sheet to the conductive rubber before using it.
10
Apply the conductive gel sheet before use
Identify the direction of
the protective film
●
Understand the protection film have A & B
side.
●
A side: blue printing protective film, peel off
and stick to the device.
B side: transparent protective film, which is to be
removed after the gel sheet attached to the
conductive rubber.
●
After removing the A side blue printing
protective film, align the conductive gel sheet
to the electrode area of the body and attach it
tightly.
●
When attaching, a slight deviation does not
affect normal usage.
●
After it’s attached, slightly pressurize the
fingertip to expel air bubbles and closely fit to
the conductive rubber.
●
Remove the B side transparent protective film,
now it’s ready to use.
●
The new conductive gel is very sticky. You can
use your finger to pat a while before wearing it
to reduce the excessive adhesion level.
●
What should I do if I accidentally paste the gel sheet on crooked? If
the deviation from the alignment is more than 3mm, we recommend
that it be re-attached. At this moment, together with the transparent
film, try to carefully peel it off slowly with the protective films, level
them evenly and paste again.
●
Do not use damaged, degraded, or excessively dirty conductive gel
sheets. It may cause burns to your skin