Uninterruptible Power Supplies PowerWAVE 9000 DPA, Инструкция по установке и эксплуатации

Страница: 45 / 104

PowerWAVE 9000 DPA UPS - Installation 3-23
(Issue 2.1 Oct. 2009)
3.9 Interfacing
Each UPS cabinet is provided with communication port on each single
module and a communication card, which provides system information.
On the Module:
• JD1/RS232 Sub D9/male: SMART PORT Interface (one per
Module)
Communication card (next to the distribution):
• Input Interfaces X1 (Phoenix terminals)
• Output Interfaces: X2, X3, X4 DRY PORTs, volt-free contacts
• JD11/RS232 Sub D9/female Interface (UPS system to computer)
• JD12/RS232 Sub D9/male Interface for Multidrop connection
between several UPS cabinets
• USB Interface (UPS system to computer)
3.9.1 Smart Port (Serial RS 232)
The SMART PORT is an intelligent RS 232 serial port that allows the UPS
to be connected to a computer. The connector is a standard D-Type, 9-pin,
male.
When installed the optional SMART PORT software, WAVEMON allows
the computer to monitor the mains voltage and the UPS-status
continuously.
Figure 3.18 shows the connection to a PC from the UPS.
Figure 3.18: Connector Cable - PC Serial Port with 9-pin Connection
Interface Cable
UPS End
(9-Pin, D-Type Male)
Interface Cable
Computer End
(9-Pin, D-Type Female)
Connects to
Computer
Connects to UPS
SMARTPORT
1
2
3
5
9
1
2
3
5
9