Uninet IColor 650, Руководство пользователя

Страница: 49 / 74

49
Replacing Image Drum Cartridges
•
When the ‘[COLOR] Image Drum Near Life’, (‘[COLOR]’ indicates C (cyan), M (magenta), Y (yellow) or K (black))
appears on the display screen, prepare a replacement drum cartridge.
•
When the ‘Please install new Image Drum Unit’ appears and printing is stopped, replace the drum cartridge.
Use the ‘Toner / Drum Cartridge Replacement Guide’ on page 44 to determine which color drum cartridge needs
to be replaced based on how they are installed in the printer. Do not only follow the display, unless it calls M
(magenta) or Y (yellow) which will always be correct.
When using A4 paper (simplex printing), the estimated replacement cycle of an image drum is approximately
30,000 pages. This estimation assumes the standard use condition (three pages are printed at a time). Printing
one page at a time reduces the drum lifetime approximately by half.
The actual number of pages you can print with the image drum depends on how you use the printer. It may be
less than half the above estimation depending on the printing conditions.
Though opening and closing the front cover may extend the life of an image drum for a while, it is recommended
to replace it soon after the "Install New image drum" is displayed.
Use extra care when handling the image drum (the green cylinder) because it is fragile.
Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Even under
room lighting, do not leave the image drum for 5 minutes or more.
1)
Determine which image drums require replacement, taking note that the color installed in the front or rear slot of
the printer may not match the display.
2) Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the
front cover (2) forward.
3) Press the open button (3) and open the output tray (4).