16
6)
Select the encryption method you checked in step 1, and then press the «ENTER» button.
7)
The procedure depends on the encryption method you selected in step 5:
•
If you selected [WPA/WPA2-PSK], select [TKIP/AES], and then press the «ENTER» button. Enter the Pre-shared
Key afterward and select [Next].
•
If you selected [WPA2-PSK], select [AES], and then press the «ENTER» button. Enter the Pre-shared Key
afterward and select [Next].
•
If you selected [WEP], enter the WEP Key, and press [Next].
8)
If the displayed value is the same as the value that you checked in step 1, press the «ENTER» button.
•
It takes approximately 30 seconds for the printer to detect the wireless LAN access point.
9)
When the screen indicates that connection is established, select [Close] and press the «ENTER» button.
Connecting the Printer Directly (AP Mode)
Automatic Connection (Push-button)
•
Wireless LAN (AP mode) directly connects wireless devices (computers, tablets, smartphones, etc.) to the printer
without using a wireless LAN access point.
•
You cannot enable wireless LAN (infrastructure) and wireless LAN (AP mode) at the same time.
1)
Confirm the position of the WPS button on your wireless device by the manual attached to the device.
2)
Turn on the printer.
•
If the "Do you want to Set-up wireless?" message appears, select [No (Do not show next time)].
3)
Press the scroll button several times to select [Wireless(AP Mode) Setting] and press the «ENTER» button.
4)
Enter the administrator password using the numeric (0-9) keys, and then press the «ENTER» button.
5)
Press the up or down scroll button to select [Enable] and then press the «ENTER» button.
6)
Press the down scroll button to select [Automatic Setup (PushButton)] and press the «ENTER» button.
7)
Select [Yes], and then press the «ENTER» button.
8)
Start the WPS-PBC (push button) operation on your wireless device to connect to the printer.
•
When [Connection successful] is displayed, the setup of the wireless LAN is completed.
•
If [Connection failed] is displayed, follow the steps in "Manual Setup" to try again.
Manual Setup
•
Wireless LAN (AP mode) directly connects wireless devices (computers, tablets, smartphones, etc.) to the printer
without using a wireless LAN access point.
1)
Turn on the printer.
2)
Press the down scroll button several times to select [Wireless(AP Mode) Setting] and press the «ENTER» button.
Содержание IColor 650
Страница 1: ...1 IColor 650 Digital Color White Transfer Media Printer User Manual ...
Страница 5: ...5 Printer Guide Exterior Front View ...
Страница 6: ...6 Interior and Exterior Rear View ...
Страница 7: ...7 Control Panel ...
