Uninet IColor 650, Руководство пользователя

Страница: 27 / 74

27
4) Press the «ON LINE» button.
Setting the Time Before Entering the Sleep Mode
•
When a printer is in the power saving mode, press the «POWER SAVE» button to restore from the mode.
•
Check if the message “Ready To Print” appears. If the message is not displayed, press the «ON LINE» button.
5) Press the «Fn» key on the operator panel.
6) Enter «2» «0» «1» using the numeric keypad and then press the «ENTER» button.
7) Press the scroll buttons to specify the time and then press the «ENTER» button.
8) Press the «ON LINE» button.
Automatically Turning the Printer Off (Auto Power Off)
•
The printer is equipped with the Auto Power Off function which automatically turns the power off if it is left idle
for a certain period of time.
•
There are three options for the Auto Power Off setting and [Auto Config] is set by factory default.
o
[Auto Config]: The printer automatically turns off after being left unoperated for a certain period of time
unless the printer is in the following conditions.
- A LAN cable is connected to the network interface connector.
- Wireless LAN is enabled.
o
[Enable]: If you do not use the printer for a certain period of time, the printer automatically turns off.
o
[Disable]: Disables the Auto Power Off function. The printer does not automatically turn off.
1) Press the down scroll button several times to select [Admin Setup] and press the «ENTER» button.
2) Enter the administrator password using the numeric (0-9) keys, and then press the «ENTER» button.
•
The factory default administrator password is "123456". If the administrator password is changed, enter the
updated password.
3) Press the down scroll button several times to select [Power Setup] and press the «ENTER» button.
4) Press the down button several times to select [Auto Power Off] and press the «ENTER» button.
5) Press the up or down scroll button to select value you want to set and press the «ENTER» button.
6) Make sure that [*] is displayed on the left of the set time.
7) Press the «BACK» button to display the [Ready To Print] screen.
Setting the Time Before Entering the Auto Power Off Mode
•
When a printer is in the power saving mode, press the «POWER SAVE» button to restore from the mode.
•
Check if the message “Ready To Print” appears. If the message is not displayed, press the «ON LINE» button.
1) Press the «Fn» key on the operator panel.