17
XP
11.0 Cleaning
This section defines basic cleaning procedures for the Unit. Although the Unit will perform dependably right out of the box,
periodic inspection and cleaning should be performed to keep it in good working order.
To prevent damage, Unimark recommends that only qualified service technicians should perform Section 11.2 and above.
The following inspection/cleaning procedures are presented separately for clarity, but may be performed at the same time:
Note: The Unit contains electronic circuitry, solenoids, and motor-driven mechanisms that all generate a small amount of heat. In normal
operation, the enclosure may feel warm, particularly on the top surface, however it should not feel or smell hot.
WARNING
To prevent personal injury, remove power before performing preventive maintenance.
CAUTION
To prevent damage, do not touch the print head or encoder components
unless standard electrostatic discharge (ESD) handling precautions are taken.
Stock Sensors on Inner Wall
