Unilumin Uslim-O Series, Руководство по эксплуатации продукта

Страница: 34 / 92

Chapter 3 LED Display Control Setting
24
2) As shown in Figure 3-14, you can set The retry number when adjustment
failed to the required number of retries. Then click Add to enter the interface for
adding scheduled adjustment information.
Figure 3-14 Config Schedule File
Set Start Time and Brightness . Click Add to finish the setting. Then click Exit (you
can modify the parameters and click Add if you want to add multiple entries).
Figure 3-15 Adding Scheduled Adjustment Information
Start Time: You can set the start time at which the brightness value and Gama value
take effect.
Brightness: You can set the display brightness.
Gamma: You can set the Gamma value. The default Gamma value is 2.8. It is
recommended that the default Gamma value be retained.