background image

 

 
D.    SAFETY OF HANDLING 
VT  batteries  are  maintenance-free  electrochemical  systems  designed  to  provide  years  of 
trouble-free  electrical  energy.    The  performance  and  service  life  of  these  batteries  can  be 
maximized by observing the following guidelines: 
 
①  Heat kills batteries. You must avoid placing batteries in close proximity to heat sources of 
any kind.    You will enjoy longer service life, if batteries are operated in ambient temperature 
ranges of 20℃(68°  F) 
 
②  Since  the  batteries  may  generate  ignitable  gas,  please  do  not  install  them  close  to  any 
item that produces sparks. 
 
③  If the battery is to  be used in  an enclosed space or in a container, provision should  be 
made for adequate ventilation. 
 
④  As the battery containers and covers are made of ABS plastic  resin, placing batteries in 
an  atmosphere  of,  or  in  contact  with  organic  solvents  or  adhesive  materials  should  be 
avoided. 
 
⑤  Permissible operating temperature range of battery is -20℃  to 50℃, but using within an 
operating range of 5℃  to 35℃  will extend service life. 
 
⑥  Use shock absorber and fasten battery firmly when heavy vibration of shock is expected 
during service. 
 
⑦  When  connecting  the  batteries,  free  air  space  must  be  provided  for  each  battery.    The 
recommended minimum space between batteries is 0.02 inches(5mm) to 0.04(10mm) 
 
⑧  Clean the battery with a piece of wet cloth. Never have the battery splashed of deposited 
with oils or organic solvents such as gasoline or paint thinner, nor have it cleaned with cloths 
impregnant with these materials. 
⑨  Dismantling the battery is not advisable. If sulphuric acid is deposited on skin or clothes, 
please  wash  well  with  sufficient  amount  of  fresh  water  and  obtain  immediate  medical 
attention. 
 
⑩  A battery is liable to rupture if thrown into fire. Please avoid such conduct at all times. 
 
⑪  Touching electrically conductive parts might result  in  an electric  shock. Be sure  to wear 
rubber gloves before inspection or regular service. 
 
⑫  Mixed use of batteries with different capacities, histories and/or manufactures is liable to 
cause  damage  to  the  battery  or  the  equipment.  If  this  is  unavoidable,  please  consult 
manufacturer beforehand. 
 
Should you have any other question, please feel free to contact UNIKOR BATTERY CO., LTD. 
at any time of your convenience.   

www.ukbkorea.com 

 

Содержание MXVOLTA

















Отзывы: