Unify OpenScape CP700 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 243

Unify OpenScape CP700 Скачать руководство пользователя страница 3

3

Important Notes

Symbol

For safety reasons, the telephone can only be supplied with power as follows:
• with the supplied original power supply unit,
• using a LAN with PoE (Power over Ethernet) which supports the IEEE

802.3af standard.

Never open the telephone. If you encounter any problems, contact your tech-
nical support.

Use only original accessories!
Using other accessories may be dangerous, and will invalidate the warranty,
extended manufacturer's liability, and the CE mark and other certifications.

The device conforms to the EU Directive as attested by the CE marking. The CE Dec-

laration of Conformity and, where applicable, other existing declarations of conformi-

ty as well as further information on regulations that restrict the usage of substances

in products or affect the declaration of substances used in products can be found in

the Unify Expert WIKI at

http://wiki.unify.com/

under the "Declarations of Conformity"

section.

The adjacent symbol indicates that any electrical and electronic products installed

and sold in countries of the European Union to which the WEEE2 Directive 2012/19/

EU applies should be disposed of separately from the municipal waste stream in ap-

propriate collection systems.
Information concerning the proper disposal of your Unify product in the business-to-

business market segment is available from your local sales representative in Unify or

partner sales.

«
1
2
3
4
5
...
»

Содержание OpenScape CP700




















































































































































































































































Отзывы:

Нет отзывов