background image

29

Status bar

The always visible status bar at the top of the screen displays the current time, phone status, pres-
ence status, and the phone number or name.

When the phone is idle, the status bar displays also the current date. The current date interchang-
es with Bluetooth sensor reading information, if a Bluetooth Temperature sensor has been paired 
with the phone.

When the phone has a call, the status bar displays also information about the current call.

Different icons represent different situations and switches:

Icon

Meaning

The ringer is deactivated 

 page 24

The ringer is set to a beep 

 page 24

The ringer is activated

Forwarding is enabled

There is a connected call

There is an incoming or outgoing call that is not yet connected

There is a paused call

The remote maintenance function is activated

A Bluetooth keyboard is paired

A Bluetooth remote device is paired

The Bluetooth function is activated 

 page 152

The Bluetooth function is activated and a device is connected

There is an incoming, connected or outgoing HFAG call

Indicates the battery level of the connected Bluetooth device

g

e

Содержание OpenScape CP700




















































































































































































































































Отзывы: