SAS to SAS/SATA JBOD Subsystem
30
User Manual
7.
Turn the disk tray upside down. Align the four screw holes of the 2.5” SATA
disk drive in the four
Hole y
of the disk tray. To secure the disk drive into the
disk tray, tighten four screws on these holes of the disk tray. Note in the
picture below where the screws should be placed in the disk tray holes.
NOTE: All the disk tray holes are labelled accordingly.
8.
Insert the disk tray into the subsystem.
Tray Hole y
