SAS to SAS/SATA JBOD Subsystem
User Manual
19
4.
Place the hard drive in the disk tray. Turn the disk tray upside down. Align the
four screw holes of the SAS disk drive in the four Hole A of the disk tray. To
secure the disk drive into the disk tray, tighten four screws on these holes of
the disk tray. Note in the picture below where the screws should be placed in
the disk tray holes.
NOTE: The mounting hole locations of the new 6-disk are
different from the existing drives.
3-, 4-, and 5-disk
6-disk
Four bottom mounting holes of drive
Four bottom mounting holes of drive