SAS to SAS/SATA JBOD Subsystem
User Manual
31
2.3 Connecting the JBOD Subsystem
2.3.1 Connecting to SAS HBA
The JBOD Subsystem supports SAS interface which provides fast 1,200MB data
transfer rate using SAS phy. Attach one end of the SAS cable to the SAS IN Port
and the other end to the host bus adapter’s (HBA) external SAS connector or to
the SAS Switch. (The host b u s adapter is installed in your Host computer system.)
2.3.2 Connecting to RAID Subsystem
Attach one end of the SAS cable to the SAS IN Port of the JBOD controller module
and the other end to the SAS Expansion Port on the RAID controller of RAID
subsystem. If configured in redundant mode, connect the other SAS cable to the
SAS IN Port of the other JBOD controller, and the other end to the SAS Expansion
Port on the other RAID controller of RAID subsystem.
