![background image](http://html1.mh-extra.com/html/national-instruments/ni-9919/ni-9919_installation-manual_3393889001.webp)
INSTALLATION GUIDE AND SPECIFICATIONS
NI 9919
Shielded Rack-Mount Enclosure for CompactRIO and NI CompactDAQ
This document explains how to set up and install the National Instruments 9919 rack-mount
enclosure.
Caution
National Instruments makes no product safety or CE marking compliance
claims for the NI 9919. The end user is responsible for conformity to any and all
compliance requirements.
Caution
Do not operate or install the NI 9919 in a manner not specified in this
guide. Product misuse can result in a hazard. You can compromise the safety
protection built into the product if the product is damaged in any way. If the product
is damaged, return it to National Instruments for repair.
Caution
The safety guidelines and specifications in this document are specific to
the NI 9919. The other components in the system might not meet the same
specifications. Refer to the documentation for each component in the system to
determine the safety ratings and specifications for the entire system.
Caution
The NI 9919 requires a connection from the premise wire safety ground
to the earth ground terminal (protective earth). The earth safety ground must be
connected during use of this equipment to minimize shock hazards refer to the
section for instructions on connecting safety ground.
Before You Begin
Refer to the documentation for your chassis and power supply
to find installation and grounding instructions specific to your devices.