VISAGE SCREEN SYSTEM (ASSEMBLED)
OPERATIONAL/FIXING INSTRUCTION LEAFLET
TM
OPENING AND CLOSING FOUR SIDED SCREEN COMPLETE WITH DOOR:
Insert Glasdon Key into lock and
turn anticlockwise to unlock the
door. (Alternatively: Turn twist
lock anticlockwise to unlock
door.)
Using handle pull door open
to 90 degree position.
To ensure that the door remains
open whilst removing the
wheeled bin, turn the door stay
catch clockwise so that it is
positioned horizontally.
Remove wheeled bin.
Close the door and insert key into
lock. Turn key clockwise to lock
door. (Alternatively: Turn twist lock
clockwise to lock door.)
P. 1
1
2
3
4
5
6
After replacing the wheeled bin,
remove the door stay catch by
pushing upwards anticlockwise so
that is positioned vertically.
NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff involved
with the installation. Please also refer to the ‘Manual Handling Operations Regulations 1992’ during the
handling of the product and materials used for installation.
Total weight of the screens are: Two Sided 770 - 40kg Three Sided 770 - 53kg Four Sided 770 - 80kg
Two Sided 1280 - 46kg Three Sided 1280 - 65kg Four Sided 1280 - 92kg
NOTE: To allow the wheeled bin to sit inside the screen in the correct position, it is recommended that
the lid of the wheeled bin remains attached and is simply folded over the back of the bin when in use.
For best results please ensure that the front of the wheeled bin is level with the front two extrusions.
REMOVING SCREEN FROM PALLET:
To remove the screen from the pallet first make sure that it is in the area where it is to be ground fixed (will
be difficult to manoeuvre when off the pallet). Open the door if necessary (see Figs1-3) and using a hand
drill remove screws and washers at the base of each extrusion. Close and lock the door if necessary (Figs 5-6)
then slide or lift the screen from the pallet (will require 2-3 people for assistance).
