Unified Brands Randell 2127AC Скачать руководство пользователя страница 16

Страница: 16 / 23

888-994-7636

Control Settings con’t

DIXELL CONTROL SETTING INSTRUCTIONS

HOW TO CHANGE A PARAMETER VALUE

To change the parameter’s values operate as follows:

1. -

Enter the Programming mode by pressing the Set and Down Arrow for 3

seconds (the defrost and water drops symbol will start blinking)

2. -

Select the required parameter.

3. -

Press the “SET” key to display its value. (Now only the defrost symbol is

blinking).

4. -

Use up or down arrow to change its value.

5. -

Press “SET” to store the new value and move to the following parameter.

To Exit: Press SET + up arrow or wait 15 seconds without pressing a key.

THE HIDDEN MENU

The hidden menu includes all the parameter of the instrument.

HOW TO ENTER THE HIDDEN MENU

1. -

Enter the Programming mode by pressing the set + down arrow key for 3

seconds (the defrost and water drops symbol will start blinking)

2. -

When a parameter is displayed; keep pressed the Set + down arrows for

more than 7 seconds. The Pr2 label will be displayed immediately
followed from the HY parameter.

NOW YOU ARE IN THE HIDDEN

MENU.

3. -

Select the required parameter.

4. -

Press the

“SET”

key to display its value (Now only the defrost symbol LED

is blinking).

5. -

Use up or down arrow to change its value.

6. -

Press

“SET”

to store the new value and move to the following parameter.

HOW TO LOCK THE KEYBOARD

1. -

Keep pressed for more than 3 seconds the up and down arrow keys.

2. -

The

“POF”

message will be displayed and the keyboard will be locked. At

this point it will be possible only to see the set point or the

MAX

Min

temperature stored.

3. -

If a key is pressed more than 3 seconds the

“POF”

message will be

displayed.

TO UNLOCK THE KEYBOARD

1. -

Keep pressed together for more than 3 seconds the up and down arrow

keys till the

“POn”

message will be displayed.

Содержание Randell 2127AC
























Результаты поиска

Содержание Randell 2127AC

Отзывы:

Похожие инструкции для Randell 2127AC

Бренды по названию

Популярные бренды

Unified Brands Randell 2127AC, Руководство оператора

Результаты поиска

Содержание Randell 2127AC

Отзывы:

Похожие инструкции для Randell 2127AC

Бренды по названию

Популярные бренды