manualshive.com logo in svg

Uniden WDECT2300 Series, Быстрый старт, Страница: 46 / 60

Поделиться
Скачать
Uniden WDECT2300 Series Скачать руководство пользователя страница 46

EXP
ANDING

YOUR PHONE

[ 40 ]

• To use the

WDECT2305, register it
to the original base.

• Save this manual for

detailed operation.

• All of the handsets

ring when a call 
is received.

2 Multi-Handset Expendability

You may expand your WDECT2300 with the  purchase of an extra handset WDECT2305.
Your phone supports up to 2 handsets (including the handset supplied with your phone).
You can now place a fully-featured cordless handset anywhere AC power is available to
connect the handset charger.
The 2 handsets can be used for an outside and/or intercom call.
For example, the phone permits 3-way conferencing (2 handsets and an outside line).

EXPANDING YOUR PHONE

IMPORTANT:

• If you purchase a WDECT2305 extra handset, please register the handset to the

WDECT2300 series base before use. The WDECT2305 will not operate until it 
is registered.

• If you change a setting of the Global Setup menu in one of the handsets, you

change settings for all the handsets. For all other features they must be set
separately through each handset.

UP349BH (WDECT2300) ENG OM  1/5/05  1:19 PM  Page 40

All manuals and user guides at all-guides.com

all-guides.com

Содержание WDECT2300 Series





























































Отзывы:

Нет отзывов