manualshive.com logo in svg

Uniden WDECT2300 Series, Быстрый старт, Страница: 13 / 60

Поделиться
Скачать
Uniden WDECT2300 Series Скачать руководство пользователя страница 13

[ 7 ]

BATTERY MAINTENANCE

Cleaning the battery charging contacts

To maintain a good charge, it is important to clean the charging
contacts on the handset once a month. Use a dry cloth or pencil
eraser to clean.

Battery use time (per charge) 

Fully charged
• Up to 7 hours continuous use.
• Up to 10 days when the handset is in the standby mode (up to 15 hours when in DirectLink mode)
Recharge your phone on a regular basis by returning the handset to the charger after each phone call.

Low battery alert

When the batteries are very low and need to be charged, the phone is
programmed to eliminate functions in order to save power.

The batteries need to be charged when:

- The empty battery icon 

appears.

- “

Low Battery

” appears in the display.

If the phone is in the standby mode, none of keys will operate. If you are on a
call, complete your conversation as quickly as possible, and return the handset
to the cradle.

L o w   B a t t e r y

UP349BH (WDECT2300) ENG OM  1/5/05  1:18 PM  Page 7

All manuals and user guides at all-guides.com

Содержание WDECT2300 Series





























































Отзывы:

Нет отзывов