manualshive.com logo in svg

Uniden WDECT2300 Series, Быстрый старт, Страница: 27 / 60

Поделиться
Скачать
Uniden WDECT2300 Series Скачать руководство пользователя страница 27

The Keypad Lock prevent user from pressing the keypad accidentally.
You can still answer calls, and receive page and phonebook locations,
and the keypad lock is reactivated after the operation.

To lock the keypad 

Press and hold 

until you hear a confirmation tone. 

Keypad Locked

appears. 

If anykey is pressed when keypad is locked,

To unlock keypad press & hold * key

appears.

To unlock the keypad

Press and hold 

again. 

Keypad Unlocked

appears.

[ 21 ]

PLACING A CALL ON HOLD

KEYPAD LOCK

1) During a call, press 

/transfer/int’com

. 

The call will be put on hold.

After 10 seconds of pressing 

/transfer/int’com

or by pressing the 

key, the handset display

screen will read,

Line On Hold

.

2) To talk to the caller, press 

or 

speaker

on a handset. The phone will return back to the call.

You can hold a call
for 5 minutes, when
5 minutes has
passed, the call is
disconnected and
the phone returns to
standby mode.

Hold,to transfer
 Handset    #2

   SUN 12:00A
   Handset #1
  Line On Hold

UP349BH (WDECT2300) ENG OM  1/5/05  1:18 PM  Page 21

All manuals and user guides at all-guides.com

Содержание WDECT2300 Series





























































Отзывы:

Нет отзывов