Uniden WDECT2300 Series, Быстрый старт, Страница: 24 / 60

[ 18 ]
Setting the Dial Mode (Australia only)
1) Enter the Global Setup menu, and then the Dial Mode
submenu (see “Entering the Menu” on page 13).
2) Press /vol/ or /vol/ to change the
select, Tone or Pulse (the initial setting is Tone).
3) Press . You will hear a confirmation tone.
Copy Phonebook
1) Enter the Global Setup menu, and then the Copy
Phonebook submenu (see “Entering the Menu” on
page 13).
2) Press /vol/ or /vol/ to choose One
Memory
or
All Memory
, and then press .
If you choose All Memory , go to step 4.
3) Press /vol/ or /vol/ , or the number keypad ( 0-9 ) to select the
phonebook location you want to export, and then press .
4) Press /vol/ or /vol/ to select the handset to which you want transfer the
phonebook locations, and then press .
If you choose All Memory in the step 2, Are you sure ? appears.
Press /vol/ or /vol/ to select Ye s, and then press .
The phonebook locations will be transferred to the handset. On the receiving handset,
Receiving and the handset name appear. When the transfer complete, Done!
appears on the handset.
• If you receive a call
or set up the Global
Setup menu, the
transfer will
be canceled.
• If an error occurs,
the phonebook
locations transferred
before the error were
stored in the
receiving handset.
Unavailable
appears on
the display.
• When the memory of
the receiving handset
is full,
Not
enough memory
in Receiving
Handset appears.
You cannot transfer
the phonebook
location.
Copy Phonebook
One Memory
All Memory :xxx
Dial Mode
Tone
Pulse
UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 18
All manuals and user guides at all-guides.com