manualshive.com logo in svg

Uniden WDECT2300 Series, Быстрый старт, Страница: 29 / 60

Поделиться
Скачать
Uniden WDECT2300 Series Скачать руководство пользователя страница 29

[ 23 ]

ADJUSTING THE HANDSET RINGER, EARPIECE AND SPEAKER VOLUME

Handset ringer volume

Press the volume up key or volume down key (labeled as 

/vol/

or 

/vol/

in standby mode to select one

of three ringer volume (off, low, or high).

Earpiece and speaker volume

Pressing the volume up key or volume down key (labeled as

/vol/

or 

/vol/

key) during a call will change

the earpiece and speaker volume of the handset. This setting
will remain in effect after the telephone call has ended.

Ringer Mute

You can temporarily mute the incoming ring. When the handset is off the cradle and the
phone is ringing, press 

. The incoming ring will return to the previous setting

starting with the next incoming call.

When you press volume up key (

/vol/

) in the maximum volume level or

volume down key (

/vol/

) in the lowest volume level, an error tone sounds.

Standby Mode - The
handset is not in use
and 
has not been pressed.

UP349BH (WDECT2300) ENG OM  1/5/05  1:18 PM  Page 23

All manuals and user guides at all-guides.com

Содержание WDECT2300 Series





























































Отзывы:

Нет отзывов