[ 13 ]
Global Setup
If you change one of the Global settings, you change the setting for all additional
handsets. Only one handset can change Global settings at a time.
Submenu name
Description
Day & time
Set the day and time of your display (see page 19).
Name Tag (POP ID)
Display the stored name with the Caller ID telephone number, if the displayed
(Default is on)
Caller ID telephone number is exactly the same as a number stored in the
phone book (see page 19).
Insert 0
Add “0” or “00” to the number, when you receive the Caller ID message
(New Zealand only) (see page 19).
Dial Mode
Set the dial mode to tone or pulse (see page 20). Most phone systems use tone
(Australia only)
dialing, which send DTMF tone through phone line. The default is tone dialing.
(Default is tone)
Depends on your dialing system, set the dial mode.
Copy Phonebook
Allow you to transfer the phonebook data stored in one handset to another
handset (see page 20).
System Reset
System Reset is used to clear the handset’s ID from the main base unit, or the
base ID from the handset.
Submenu name
Description
Deregister HS
Clear the handset ID from the base. Use this option, for example, when you change
the digital security code (see page 21).
Replacing Base
Clear the base ID. Use this option, for example, if you wish to deregister the base
to use the handset with another base of the WDECT2315 and WDECT2355 series
(see page 21).
UP354BH(WD2) OM 5/14/04 10:49 AM Page 13
