[ 11 ]
Handset Setup
The following submenu options must be set separately for each handset.
Submenu name
Description
Ringer Tones
Adjusting the ringer tone (tone your phone makes when ringing)
(Default is Flicker)
(see page 16).
Set the distinctive ring (see page 16). “Distinctive Ring” allows you to
preset memory locations with a designated ring tone. When an incoming call
is received and the Caller ID information matches the information in one of
Distinct. Ring
the memory locations, the distinctive ring that has been stored for that
(Default is on)
particular Caller will sound. If you have set multiple memory locations with
distinctive rings, switching the setting to “Distinctive Off” will result in no
distinctive ringing. All incoming calls will have a normal ring tone. Switching to
“Distinctive On” will activate all programmed distinctive ring memory locations.
AutoTalk
Allows you to answer the phone without pressing
or
speaker
.
(Default is on)
When the AutoTalk is set to on, simply remove the handset from the cradle and
the phone automatically answers the call (see page 16).
Anykey Answer
Allows you to answer the phone without pressing
or
speaker
.
(Default is on)
When the Anykey Answer is on, you can answer a call by pressing any number
key,
, or
on the handset (see page 17).
Banner (True Banner)
Customize your handset(s) by giving it a banner name. The name will be
displayed on the LCD screen during standby mode, Intercom, Transfer, Room
Monitor and Copy Phonebook operation. The banner name will be displayed on
the receiving handset as well (see page 17).
Key Touch Tone
Allows you to set your phone’s key touch-tone to on or off (tone your keypad
(Default is on)
makes when keys are pressed) (see page 17).
UP354BH(WD2) OM 5/14/04 10:49 AM Page 11
